Technical data sheets Single acting push cylinders CF/CFU serien CF cylinders are real work horses within REHOBOT's cylinder product range. They are, for example, part of our push- and pull-kits (for more information, please see separate product information). The cylinders are prepared for accessories to be connected at the piston top or at the bottom of...
Technical data sheets Single acting cylinders aluminium CFA-series REHOBOT cylinders in the CFA-series are all made of high-tensile aluminium and have a superior service life compared to similar products made out of steel. The choice of material also offers an outstanding power to weight ration - approximately 50% less weight than comparable steel...
Technical data sheets CFC cylinders are real all-round cylinders. They come in a large number of variants all with different characteristics such as capacity, stroke or height. The CFC-cylinders has a compact design and a long stroke length. The design ensure a small outer dimensions.
Technical data sheets CSF-cylinders have the same excellent characteristics as the earlier CX/CXR-range. They are available in sizes from 11 (13*) to 88 (100*) ton lifting capacity and 50 to 200 mm stroke.
Technical data sheets CL- cylinder is the right choice for those who need small and compact installation dimensions. Threaded holes for fastening makes it easy to integrate the cylinder into different kinds of applications.
Technical data sheets CH/CHF hollow cylinders can be used for both push and pull operations due to the through-hole. For example, by inserting a rod through the cylinder, the push force can also be used for pulling operations, e.g. when extracting bushings from machine elements.
Single acting hollow cylinders aluminium CHFA-series Technical data sheets The CHFA series consists of cylinders made in aluminium. This makes the products up to 50% lighter than equivalent models made in steel. Thanks to the design with a centre hole the hollow cylinders can be used for both push- and pulling-operations.
Technical data sheets CPF cylinders are pulling cylinders with 5 ton or 11 ton capacity. Both models are part of Rehobot's push and pull kits (refer to separate product information for more information) and have threads in the piston pin and cylinder bottom for connection of accessories. CPF cylinders are used when a pulling force is needed for alignment...
Technical data sheets Single acting push cylinders Blackline CF BL Our Blackline push cylinders are adapted for harsh environments with high risk of corrosion and condensation. They are built upon our successful CF-series and can be used for a variety of purposes.
Technical data sheet Single acting high tonnage push cylinders CX CX push cylinder with 220 (256*) ton lifting capacity. It is specifically designed to withstand off-center loads and is equipped with extra large, unique, piston guides. 220 (256*) ton capacity and 100 mm stroke length. CX = single acting push cylinder with load return